2009 Hustler Turf Equipment FasTrak™ SuperDuty 36/42, Kawasaki Kai 17 hp

On Sale
$2,800.00
Was $2,800.00


New/Used
Used
Availability
In Stock
Location
Small Engine Specialists
VIN
08030801
Title
Clean
Condition
Good
Year
2009
Manufacturer
Hustler Turf Equipment
Model
FasTrak™ SuperDuty 36/42, Kawasaki Kai 17 hp
Cutting Width
36"
Engine Make
KAWASAKI
Engine Cycles
4
Horsepower
17
Turning Radius
ZERO
Power Type
Gas

Overview

Dealer Insights

CONSIGNING FOR CUSTOMER
HAS FRESH ENGINE AND HYDROSTAT SERVICES
NEW DECK BEARINGS AND IDLER PULLEYS
NEW DECK BELT

Description

  • Commercial-duty ZT 2800 transmissions feature the same rotating group as Hydro-Gear pump & motor combinations. ZT transmissions feature steel cut gears, relief valve, charge pump, and spin-on oil filter.
  • Highest quality of cut and finished appearance on the market
  • Silky-smooth SmoothTrak™ steering with patented automatic park brake system
  • Toughest frame, front forks, and deck in the industry
  • Best warranty in the business
  • Simplest maintenance in the industry
  • Remote air cleaner standard
  • Molded rubber discharge chute standard
Specifications
  • Model: Kawasaki Kai
  • Horsepower: 17 hp
  • No. of Cylinders: 2
  • Displacement: 35.7 cu in (585 cc)
  • Compression Ratio: 8.5:1
  • Max. Torque: 36.2 ft. lbs. @ 2000 rpm
  • Starter: 12-volt, solenoid shift positive engagement
  • Ignition: Electronic
  • Charging System: 12-volt, 15-amp
  • Fuel: Unleaded gasoline with 87 or higher octane
  • Fuel Filter: Replaceable, automotive-type
  • Fuel Capacity: 6 US gals. (22.71 l) Site line in fueltanks
  • Air Filter: Heavy-duty air cleaner to extend the service interval for excessive, dirty applications and improved performance
  • Cooling: Air cooled. Fly-wheel fan
  • Govenor: Mechanical
  • Traction Drive System: Type Dual hydrostatic. Hydro-Gear ZT2800 commercial-duty pump/motor combination. Hydrostatic system operates on 20W50 motor oil.
  • Transmission: V-belt drive from engine crankshaft
  • Filter: Spin-on type
  • Ground Speed: Infinitely variable: 0-8 mph (0-12.87 kph) forward, 0-6 mph (0-9.66 kph) reverse
  • Steering: Twin-lever, SmoothTrak™ steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and true zero-degree-radius turns are all controlled with hand-operated controls
  • Turning Radius: True zero radius. Turns within its own length. Counter-rotating, independent drive wheels
  • Seat: Molded vinyl seat with armrest. Fore and aft adjustment. Standard seat spring
  • Front Tires: Casters 13 x 5.0 – 6, rib tread
  • Drive Tires: w/ 36 in Deck: 20 x 8.0 – 10, turf tread, w/42 in. Deck: 20 x 10.0 – 10, turf tread
  • Height: 40 in. (101.6 cm)
  • Length: w/36 in. Deck: 74 in. (187.96cm)
  • Overall width: w/36 in. Deck: 36 in. (96.5 cm) w/discharge chute up
  • Tire-to-tire width: w/36 in. Deck: 35 in. (88.9cm)
  • Weight: w/36 in. Deck: 650 lbs. (294.84 kg)
  • Length: w/42 in. Deck: 78 in. (198.12 cm)
  • Overall width: w/42 in. Deck: 42 in. (106.7 cm) w/discharge chute up
  • Tire-to-tire width: w/42 in. Deck: 38 in. (96.5 cm)
  • Weight: w/42 in. Deck: 675 lbs. (306.17 kg)
  • Deck Lift: Foot-operated deck height adjustment. Pin for setting height, detent for transport position
  • Safety Features: Operator presence system connected to deck and drive clutches. Stabilizer rollers at rear of tractor
  • Mainframe: 1.5 in. x 1.5 in. x .188 in. (3.8 cm x 3.8 cm x .32 cm) rectangular steel tubing
  • Drive motors: Mounted to .120 in. (.45 cm) welded steel
  • Front caster: Wheels mounted with roller bearings on each wheel
  • Front caster: Forks are .375 in. (.95 cm) steel
  • Controls: Hand-operated choke/throttle, ignition switch, electric mower clutch. Integrated parking brakes
  • Indicators: Hour meter, engine warning light
  • Cutting Heights: 1.5 in. to 4 in. (3.81 cm to 10.16 cm) in .25 in. increments
  • Cup Holder: Cup holder molded into the left side fuel tank. Holds nearly any cup size including Big Gulp™
  • Decks: 36 in. and 42 in. - Side-discharge decks
  • Deck Type: Free-floating mower using two blades. Mower is suspended at the corners. Includes deck-mounted rollers to improve flotation in rolling and uneven terrain. FreeFlow™ XR-7™ deck technology for minimized buildup of material under the deck and improved flow
  • Deck Lift: Raise and lower deck from driver's seat with simple foot-operated deck height adjustment. Pin for setting height, transport position. Change cutting heights, hop curbs and trailer more easily.
  • Deck Construction: 7 ga, .179 in. (.45 cm) welded steel with 11 ga, .125 in. doubler welded onto spindle mount areas. Solid 1.5 in. x .5 in. (3.81 cm x 1.27 cm) steel bars rein-force impact areas on trim edges. Steel deck housing is 4 in. (10.16 cm) deep which allows high-capacity mowing.
  • Cutting Heights: Foot-operated deck height adjustment. Height adjustment in .25 in increments from 1 in. to 5 in. (2.55 cm to 12.7 cm).
  • Mowing Blades: w/36 in. Deck: 1-13.75 in. x 2.5 in. x .20 in. and 1-20.5 in. x 2.5 in. x .20 in.
  • Mowing Blades: w/42 in. Deck: 2-20.5 in. x 2.5 in. x .20 in.
  • Blade Tip Speed: w/36 in. Deck: 18,600 fpm, w/42 in Deck: 18,400 fpm
  • Blade Drive: V-belt drive to spindles. Spring idler tension pulleys.
  • Spindles: Machine aluminum housing, 1 in. (2.5 cm) diameter high carbon steel shafts & sealed ball bearings.
  • Flotation: Suspended mower floats on spring-assisted chains. 2 anti-scalp wheels are standard.
  • Width of Cut: w/36 in. Deck: 33.5 in. (85.09 cm), w/42 in.Deck: 40.25 in. (102.24 cm)
  • Trim Capacity (left side): w/36 in. Deck: .5 in. (1.27 cm), w/42 in. Deck: 2.25 in. (5.75 cm)
Brakes
  • Service Brakes: Hydrostatic dynamic braking
  • Parking Brakes: Sprocket and cog. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Mower Drive: Single V-belt drive from engine with electric clutch. Spring tension idler for extended belt life.
Accessories
  • Mulch Kit: Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass.
  • Flex Forks™: Shock-absorbing front caster forks for a smooth cut and an even smoother ride.
Options
  • Steering Lever Extensions: Optional armrests are available for added arm support.
  • Light Kit: Work later with our optional light kit.
Warranty
  • Best warranty in the business
  • 4-year limited homeowner warranty
  • Lifetime warranty on the leading edge of the deck
  • Lifetime warranty on tractor frame
  • 2-year limited commercial warranty

Specs

Engine

Engine Manufacturer
Kawasaki Kai
Horse Power
17 hp or 19 hp
Engine Type
Kawasaki Kai
Displacement
35.7 cu in (585 cc)

General

Transmission
Type Dual hydrostatic. Hydro-Gear ZT2800 commercial-duty pump/motor combination. Hydrostatic system operates on 20W50 motor oil.
Wheel Size
Casters 13 x 5.0 – 6, rib tread; Drive Tires 20 x 8.0 – 10, turf tread on 36 in. model, 20 x 10.0 – 10, turf tread on 42 in. model
Fuel Capacity
6 US gals. (22.71 l) Site line in fueltanks

Deck

Deck Size
36 in. or 42 in.
Discharge Type
Side; Optional: Bagger, Mulcher